I’ve been spending a lot of time in the bathroom lately, and I can’t blame my old lady bladder. I’ve got four new bathrooms in progress, have just started designing another, and I’ve got four more in the pipeline. That’s a lotta loo’s. And they all have one thing in common. Size. Or should I say lack of it. Continue reading “How to design a beautiful AND functional bathroom”
I’ve designed more bathrooms than any other room since I started my business, but I never get bored of doing them because I love the problem solving aspect. People rarely have huge bathrooms and there are always logistical issues you have to work with.
And the problem solving doesn’t stop when you’ve planned bathrooms. The first fix, which is when any new pipework and electrical cables get installed before the walls are plastered, often uncovers new issues that can mean a re-think. I had to break from writing this post to go to one of my sites to talk to the bathroom fitter about raising the shower tray because the floor joists didn’t run parallel with where the waste pipe need to go. You can drill a hole in a joist for a ½” water pipe or an electric cable but not a 40mm waste pipe, you need to raise the shower tray. This then led to discussions about the height of the shelf in the shower for shampoo bottles and whether the shower screen would still fit as the ceiling had been removed to bring in light from a roof light and there was a beam in the way. This is why I never let bathroom projects start when I’m on holiday…..
Two Beautiful Bathrooms – Part Two
The bathroom I’m about to show you is very different to the one I showed you in part one of this post, and not just in style. There were lots of juicy little problems that needed to be solved in terms of the layout. But how about I show you what it used to look like before we get into that?
The customer said I could only show you these if I could guarantee her full anonymity……
Make a mental note of the door below, even that got a makeover. Just noticed the random rubik’s cube LOL.
Sometimes working out what customers will like is harder than solving the layout problems, as it isn’t always easy to describe what you like you just know it when you see it. Which is why I use tools like Houzz and Pinterest to share images with customers, and encourage them to add their own images and comments so I can build up a profile for them. After collaborating on an Ideabook with these customers I decided to design them a bathroom which had a country feel but with modern touches, lots of natural wood for Mr S and lots of pastel colours with a few copper touches for Mrs S.
Are you ready to take a look?
The Pretty Family Bathroom
I’ll give you a minute to appreciate the transformation before I run through all the juicy little problems I had to solve.
Firstly, they wanted a shower but needed to keep a bath as they have two small children and the room isn’t big enough for a separate shower cubicle. Yes I know the obvious solution is an over bath shower but if only it was that straightforward.
Mr S is VERY tall and the ceiling is not, and we needed to lower it to fit downlighters as the loft had been insulated and boarded and there is no longer access to the space above the bathroom. So after checking, double-checking and triple checking the height of the reinforced bath (which you really need when very tall adults are going to be standing in it to take a shower), and finding some very shallow LED spotlights, I calculated I only needed to lower the ceiling by 10cm. This might sound like a lot for shallow downlighters but there has to be a gap above the spotlight to allow it to ventilate. Technically you can fit them directly under loft insulation if you use breathable loft caps, but as I mentioned there was no loft access to do this so new ceiling it had to be.
This meant that a shower head on a riser would work but there wasn’t enough head height for one of those lovely big ceiling mounted or fixed rainfall shower heads which they would have liked. But I did manage to find a good compromise after hunting around on the Internet – a shower kit with a 160mm head instead of the usual 110mm. So shower problems solved.
Next issue is they wanted a bigger window but it couldn’t be any wider or the sill would always be covered in water from the shower. We could have sloped the window sill but the customer also wanted clear glass and there is a public park behind their house. So unless they wanted to attract unwanted attention and possibly complaints they would need a blind, which would have got wet and mouldy. So the new window would have to be taller but not too low because the bath needed to go under the window (trust me I tried every possible layout). Even though I had checked, double-checked and triple-checked the bath height I still didn’t rest until that bath was fitted.
From the childrens’ perspective, the advantage of this low window sill is that they can use it as a slide into the bath something Mrs S found out the other night….
On to the next challenge; they desperately needed storage but I needed to keep the space next to the bath relatively clear so that the shower screen could fold outwards 90 degrees, because if the shower screen can only fold into the bath you can’t access the bath taps. And before you say what about putting the bath taps in the middle of the bath, baths designed for central taps have two sloped ends instead of one, which isn’t great when your shower is over the bath as you can’t get right under the shower head unless you ceiling mount it. See earlier challenge. I also had to find a bath mixer tap that would pivot 90 degrees so you wouldn’t bash your shins on it when you took a shower. Something I wish some hotels would take into account.
So anyway back to storage, I put the biggest vanity unit I could next to the door, with a raised shelf behind it for additional counter space.
The vanity unit was made by a company called Parker & Walkers Furniture who can make any size and style you want and paint it in your chosen colour. Although apparently Farrow & Ball Dead Salmon was a first for them.
I also included a custom built cupboard the same depth as the toilet cistern above the toilet. I’m lucky to work with Ben Butler Kitchens & Bathrooms, Ben is a fitter and joiner so he can make me things like this. The frame for the cupboard and the cistern housing were built in pine and then clad in solid oak tongue and groove to match the top of the vanity unit.
The shower screen is a bifold that can fold in or out 90 degrees so it can fold flat against the cupboard when they bath the kids.
The walls and ceiling have been painted in Farrow & Ball Calamine which looks lovely with the oak and the copper wall lights. Two of the things I learned about Mrs S through the Ideabook is that (1) she likes flamingos, hence the wall print which just happened to be the right shades of blue and pink, and (2) she likes round mirrors. Neither of these things she knew herself until we started looking at images together.
I found a towel radiator to match the copper wall lights. The heat output isn’t enough for a bathroom this size, but they’d already decided they wanted underfloor heating which would provide the heat needed so this could just be a very pretty towel dryer.
Remember how their old cottage door looked before? Well it cost £30 to get it stripped locally and Mr S filled the holes and gave it a coat or two of oil and now it looks gorgeous. The rest of the doors in the house will be getting the same treatment. The oak effect floor tiles are so realistic you almost have to touch them to check they’re not solid oak.
I have to give Ben credit for the lights along the edge of the bath. I wanted lighting in the alcove in the shower and down the outside of the shower wall but there wasn’t room for the lighting down the edge of the shower so this was his suggestion and it’s a beautiful feature.